Home Care Exterior Finishes Osmo Anti-Slip Decking Oil
Exotic Wood Decking Finished with Osmo Anti-Slip Decking Oil 430 Clear Satin

Osmo Anti-Slip Decking Oil

Clear, satin top coat for decking already treated with colored oil. Contains a special highly compressed organic non-slip additive, which is evenly distributed in the coating and reduces slips when dry.
Osmo Anti Slip Decking Oil is ideal for use on all exterior wooden decking boards, steps and staircases, including Douglas Fir, Bangkirai, Garapa, Massaranduba, Larch and Pine. It can be used on all decking types, including ribbed and grooved, but is especially suitable for flat or smooth decking for a slip-resistant finish. It is also furnished with active ingredients to protect the coating against mold, algae and fungal attack.

A clear satin decking oil finish with anti-slip properties for previously oiled decking!

2.5L Can of Osmo Anti-Slip Decking Oil 430 Clear Satin
Colors & Sheens
Osmo Anti-Slip Decking Oil 430 Clear Satin On Spruce
Advantages
  • Slip resistant surface.
  • Resistant against algae, mold, mildew and fungal attack.
  • Based on natural vegetable oils and waxes.
  • Helps to prevent cracking, splitting and warping.
  • Durable and hard-wearing.
  • Very water and dirt-repellent
  • Micro-porous, breathable finish. Does not crack, peel or flake.
  • Easy to refresh, no sanding or primer necessary.
  • Made in Germany - Conforms to strict German Norms.
Can Sizes 0.125L | 0.75L | 2.50L | 25.00L
Information
  • Approx. coverage: 24 m²/L with one coat.
  • No. of coats: 1 coat.
  • Can be used as top coat only.
  • Application temperature: +5 °C to 35 °C.
  • Drying time: 12 hrs.
  • Storage: 5 years & longer.
Documentation Info Sheet Safety Sheet Declaration
Application Tools
Osmo Brush icon
Osmo Roller
Osmo Floor Brush icon

Osmo Anti-Slip Decking Oil is ideal for the protection of exterior wooden surfaces like Decking | Stairs where protecting against slipping is concerned.

Coverage & Accreditation:
Coverage: 24 m2/L with one coat
Osmo Oil Based Wood Finishes Advantages
Safe for human, animals and plants DIN EN 71.3 Certificate
Anti Slip Effect

How to Apply Anti-Slip Decking Oil

Finished surface in 2 days, 2 coats (base coat required)

How-to-apply-stirring-well1

Stir Well

How-to-apply-roller-brush2

Apply thinly

– Pigmented Osmo Oil –
– Easier with Osmo Decking Brush –
Wait 12 hours illustration - Wood+Care3

Let it Dry

– Normal Climatic Conditions –
How-to-apply-Second-Coat4

Second Coat

– Repeat Steps 1 to 3
with Osmo Anti-Slip Decking Oil –

Tips:

  • Recommended application: 35ml/m² per coat.
  • Wet coating can be corrected up to 15 min.
  • Anti-Slip Decking Oil is not suitable for a single product application. A base coat with a pigmented oil, such as Osmo Bangkirai-Oil, Larch-Oil or Douglas Fir Oil or Osmo Natural Oil Woodstain is recommended.
  • Osmo Anti-Slip Decking Oil is clear and therefore it offers only limited protection against UV radiation (greying). With a combination of a colored base coat and a top coat with Osmo Anti-Slip Decking Oil, wood decking is fully protected.
  • For renovation works, clean old microporous finishes thoroughly. Degrey and clean already greyed or weathered wood at the same time with Osmo Wood Reviver Power-Gel.
  • If additional protection against blue stain, rot and insects is desired, pre-treat the wood if possible on all sides with Osmo WR Base Coat.
  • To avoid greying and declining non-slip effect on high traffic areas, these areas should be re-coated at the right time.
  • Resinous wood, such as Larch or Douglas Fir, needs to weather off for at least 6 weeks. Pressure impregnated wood or woods with Wood species with a high content of natural wood extractives like Massaranduba, Bangkirai or Garapa need to weather off for at least 3 months.
  • Wood surface must be clean, dry and frost-free (moisture content max. 20%).
English