Home Care Exterior Finishes Osmo One Coat Only HS PLUS

Spruce Cladding finished with Osmo Coat Only 9212 Silver Poplar

Osmo One Coat Only HS PLUS

Transparent, satin wood finish based on natural oils for wood in outdoor areas. Microporous surface allows the wood to breathe and reduces swelling and shrinkage. Water-repellent, weatherproof and UV-stable. Will not crack, peel, flake or blister. No sanding necessary, just simply re-coat.
Osmo One Coat Only HSPlus has a low content of solvents, works without any biocides or preservatives, has a high content of solids, so it offers high coverage. Even with a very thin coat, an optimal surface protection is achieved. It is ideal for the protection of all wood in outdoor areas and also well-suited for renewing old microporous finishes.

Extremely High Coverage with Only One Coat!

Colors & Sheens
Advantages	Only one coat is required! Doubled coverage through a high oil content - saves time and money. Based on natural vegetable oils and waxes. Weather and UV resistant. Biocide and preservative free. Ideal for children's exterior play sets and garden furniture. Natural wood grain remains visible. Reduces wood swelling and shrinkage & helps to prevent cracking, splitting and warping. Water and dirt resistant. Micro-porous, breathable finish. Does not crack, peel or flake. Easy to refresh, no sanding or primer necessary. Made in Germany - Conforms to strict German Norms.
Can Sizes	0.125L \| 0.75L \| 2.50L \| 25.00L
Information	Approx. coverage: 26 m²/L with one coat. No. of coats: 1 coat. Application temperature: +5 °C to 35 °C. Drying time: 12 hrs. Storage: 5 years & longer.
Documentation	Info Sheet Safety Sheet Declaration
Application Tools

Osmo One Coat Only HS PLUS is ideal for the protection of exterior wooden surfaces like Cladding | Garden Furniture | Doors | Windows | Shutters | Fencing | Wooden Houses | Carports | Pergolas | Balconies | Playgrounds plus lots more...

Coverage & Accreditation:

Safe for human, animals and plants DIN EN 71.3 Certificate

How to Apply Osmo One Coat Only

Finished surface in 1 days, 1 coat

Stir Well

Apply thinly

– On Raw or Sanded Wood –

Let it Dry

– Normal Climatic Conditions –

Tips:

Recommended application: 35ml/m² per coat.
Wet coating can be corrected up to 15min.
If additional protection against blue stain, rot and insects is desired, pre-treat the wood if possible on all sides with Osmo WR Base Coat.
Clean old microporous stains thoroughly. Old paints and lacquers must be completely removed.
Wood surface must be clean, dry and frost-free (moisture content max. 20%).
Light transparent color tones offer only limited UV-protection (greying and fading through sunlight); therefore they are not recommended for surfaces exposed to strong sunlight.
If surfaces in outdoor areas require additional protection, apply one final top coat of Osmo UV-Protection Oil (410 or 420) after thoroughly drying. This protects against dirt and stains and extends the life of the coating. For One Coat Only HS Plus Spruce White 9211, please use Natural Oil Woodstain White 900.
For new oily or exotic wood species, approx. three months exposure to the outside elements after installation and before application is recommended.
Many wood species contain water-soluble colored extractives which may leach out naturally when weathered.

Samples with Osmo One Coat Only HS PLUS

Osmo One Coat Only HS PLUS 9211 White Spruce on Spruce

Osmo One Coat Only HS PLUS 9212 Silver Poplar on Spruce

Osmo One Coat Only HS PLUS 9221 Pine on Spruce

Osmo One Coat Only HS PLUS 9232 Mahogany on Spruce

Osmo One Coat Only HS PLUS 9234 Scandinavian Red on Spruce

Osmo One Coat Only HS PLUS 9235 Red Cedar on Spruce

Osmo One Coat Only HS PLUS 9236 Larch on Spruce

Osmo One Coat Only HS PLUS 9241 Oak on Spruce

Osmo One Coat Only HS PLUS 9242 Fir Green on Spruce

Osmo One Coat Only HS PLUS 9261 Walnut on Spruce

Osmo One Coat Only HS PLUS 9262 Teak on Spruce

Osmo One Coat Only HS PLUS 9264 Rosewood on Spruce

Osmo One Coat Only HS PLUS 9271 Ebony on Spruce